资源列表
myled.tar
- 基于linux-2.6.20内核的IO驱动程序 CPU 2410-Linux-2.6.20 kernel-based IO driver CPU 2410
2.Ket_Int
- Arm 平台上开发的中断控制程序，能实时响应外部中断，控制LED灯。实用于初学者-On Arm platform interrupt control program, real-time response to external interrupt control LED lights. Practical for beginners
u-boot-1[1].2.0atSMDK2410
- u-boot-1.2.0移植到基于SMDK2410平台，非常详细-u-boot-1.2.0 ported to SMDK2410-based platform, a very detailed
thinning.tar
- this the source code for thinng algorithm-this is the source code for thinng algorithm
GEC2410acs8900a2.6.24
- 在gec2440开发板下的网卡驱动的移植-Development board under the gec2440 transplant network card driver
Porting_MiniGUI_on_AT91SAM9261_Plateform
- 基于AT91SAM9261的MiniGUI移植详解，经本人验证，绝对可用，也方便移植到其他嵌入式平台。-MiniGUI transplantation based on the AT91SAM9261 explain, after I verified the absolute can be used, but also facilitate the migration to other embedded platforms.
zmodem_linux
- Zmodem协议Linux下的源代码。比较完整。-Zmodem protocol source code under Linux. More complete.
cam_pic_card
- QT4的ＧＵＩ程序，完成ＵＳＢ射像头数据采集，支持刷卡-QT4 GUI program, complete the USB shot like the first data collection, support card
ucos_2.83
- 操作系统ucosii的源码，版本2.83-ucosii the source operating system, version 2.83
xptools_v1.2_e6a1200_src
- 天使工具,e6手机专用,大家都知道吧,狠狠好地东西,直接编译即可-xptools1.2 for moto e6
qt_read_ini
- 用Qt4编写的显示界面，并且实现对ini文件的读写操作-Written using Qt4 ，and realize the ini file to read and write operations
Uarttest0815
- S3C6410裸机串口程序，在OK6410开发板上测试通过。-The S3C6410 bare metal serial program, in OK6410 development board tests through.