资源列表
M32
- 用于实时监控一定范围内的烟雾变化，并把状态通过无极性二总线传输给主机。-For real-time monitoring of a range of smoke changes, and the state of polarity of the second bus through transmission to the host.
R8CL35_TimerC_PWM_Ext8M_Div8
- 瑞萨芯片学习代码，对于入门的有一定的帮助-Renesas chip learning code, for the entry of some help
2
- 通电启动后，默认状态是读出E2PROM中保存的电机走纸的长度并显示，显示的走纸长度可以通过键盘重新设置-After power-up, the default state is stored in E2PROM read the paper feed motor length and display, the displayed paper feed length can be reset via the keyboard
H1750FVI
- msp430控制光强传感器H1750FVI，并将光强度转换值送到8位LED显示。-msp430 control the light intensity sensor H1750FVI, and converts light intensity value to the eight LED display.
MCP2822_drive
- MCP4822驱动，用C编写，主控芯片51单片机，-MCP4822-driven, written in C, the master chip 51,
DAC124S085
- msp430通过SPI口控制12微DA转换器DAC124S085，程序中input_reg_content都是0x700，则四通道输出都是2.2V.-msp430 through the SPI port to control 12 micro-DA converter DAC124S085, program input_reg_content are 0x700, then the four-channel output is 2.2V.
zero
- 第七届飞思卡尔智能车比赛，我们的小车泡得还算稳定，速度有一米三左右。-Seventh Freescale smart car contest, our car bubble was fairly stable, the speed of one meter three or so.
sht11ads18b20aatmega48ok
- 基于ATMEGA48单片机ds18b20和sht11两种传感器进行温湿度测量。开发软件WINAVR-ATMEGA48 MCU-based ds18b20 and sht11 two sensors for temperature and humidity measurements. Software development WINAVR
RA8875_DemoBoard_V2
- 此为RA8875实际应用，包括全部PROTEL99SE原理图和PCB。-This is the practical application of RA8875, including all PROTEL99SE schematic and PCB.
UsbToIde(CeparkV2.0)
- USB转IDE接口源代码（51单片机作为主控芯片，USB芯片是D12芯片）-USB to IDE interface source code (51 microcontroller as the master chip, USB chip is D12 chip)
Easy-USB-51-Programer
- USB接口的编程器下位机源代码，是一个很好的基于USB HID类的应用代码-USB interface programming source code under-bit machine is a good USB HID class-based application code
stm32-games-0-2013.6.3
- stm 单片机程序 包含 485通信，usb通信，tm1629驱动程序-stm MCU program contains 485, usb communication, tm1629 driver