资源列表
Ultrasonic-Ranging
- 利用超声波测距模块_HC-SR04进行超声波测距后，将测得的距离显示到128*64的LCD上，并附有HC-SR04用户手册。-Using ultrasonic ranging module _HC-SR04 ultrasonic distance measurement, it will display the measured distance to 128* 64 LCD, along with HC-SR04 user manual.
readFLASH-writeLCD
- 单片机利用SPI总线从flash读取图像数据并通过SPI写入液晶屏。-Microcontroller using SPI bus to read image data from the flash and write into the LCD screen via the SPI interface.
JIAOTONGDENG
- 交通灯底部开发程序,程序是通过P1口输出-Traffic lights at the bottom of the development process
nRF24L01_cx
- 主要用在智能小车温度传感避让上，实现温度引导寻迹-it can sense temperature and realised intelligent tracing
intelligent-tracing
- 智能小车寻迹程序，实现小车按指定的轨道运行，可行性强，性能稳定-it can realise intelligent tracing and make the car walk in the designed channel
accelerate-and-decelerte
- 运用c语言进行编程，以AT89C52为核心芯片，以智能小车为载体，实现小车加速和减速-it can make the intelligent car speed up and decelerate
walk-forward-and-back
- 主要用在智能小车上，实现小车自动往返，控制小车的运行轨迹-it can make the intelligent car walk forth and back automatically
juzhengjianpan
- 矩阵键盘和数码管显示程序，判断按钮是否被按下并自带去抖代码，然后送往数码管进行显示-it can detect the keyboard and jugde which button had been pressed down
PWM
- 是单片机P2.7引脚产生PWM脉冲，通过改变脉冲的宽度使该引脚LED增光或减光-P2.7 pin is the microcontroller PWM pulses generated by changing the pulse width so that the credit or pin LED dimmer
SMG4
- 用一位数码管循环显示十六进制0~9，数字变换的间隔为3s-With a digital control loop shown in hexadecimal 0-9, digital conversion interval of 3s
LCD_DS18B20
- 使用DS18B20温度传感器把温度信号传入单片机，经单片机处理，由LCD显示实时温度-Use DS18B20 temperature sensor the temperature signal incoming microcontroller, processed by the microcontroller, the LCD displays real-time temperature
WX6-5
- 利用无线电发射及接收模块结合单片机，设计一个简易的无线电遥控系统，控制P1端所接的低4位LED亮或灭-The use of radio transmitting and receiving modules combine microcontroller, design a simple radio remote control system, the control of the connected terminal P1 low 4 LED on or off