资源列表
DS18B20
- 单片机串口通信，DS18B20温度传感器，计算机通过串口采集数据-Chip serial communication, DS18B20 temperature sensor, data acquisition computer through the serial port
li-shui-deng
- 用C语言编写的单片机流水灯程序，用PWM调节占空比改变LED的渐明渐暗效果。-Using C language microcontroller light water program, change the LED PWM duty cycle adjust gradually dimming effect.
liushuideng
- 从左至右渐亮，再从右至左渐灭。1,3,5,7全亮，其余去全灭等-From left to right gradually bright, again from right to left quenching.
AD9852_TEST
- DDS程序，基于AD9852，文件包含分频字节编译，频率控制字-DDS driver source code, based on AD9852 chip
2.4-LCD-display-current-temperature
- 2.4寸彩屏实时显示当前温度，基于STC52单片机-2.4-inch color display the current temperature, microcontroller based STC52
Simple-calculator-
- 用液晶显示的简易计算器，含硬件原理图、程序代码及PCB设计-Simple calculator with LCD, including hardware schematics, program code and PCB design
12DS18b20
- AT89C51对DS18B20的读写操作 -AT89C51 read and write operations on DS18B20
ADC0832
- AT89C51对ADC0832的控制过程： 1、建立连接，启动转换； 2、接收数据； 3、数据处理。 -The control process of AT89C51 of ADC0832: 1, the connection is established, and start the conversion 2, receive data 3, the data processing.
Project11
- 设计并制作一个能自动循迹小汽车。 演示场地1米见方，表面贴有白纸，在其上有黑色胶带制成的轨迹（宽6厘米，均匀）。 能够自行沿着曲线行走（A点循迹到C点），而无需人工干预 （遥控-The design and construction of an automatic tracking the car. Demo site 1 meter square, the surface with a blank sheet of paper, made of a black tape on th
Project9
- 基于AT89C51的LCD1602显示控制，设计显示不同的字符；水平滚动和垂直滚动显示-Based on AT89C51 LCD1602 display control, design display different character horizontal scrolling and vertical scrolling
project7
- 抢答器设计模块包括主持人模块、抢答模块、显示模块、声响模块、单片机控制模块 -Vies to answer first device design module includes the host module, vies to answer first module, display module, sound module, MCU control module
kaijijiyi
- IIC协议 EEPROM 每次开机都将次数加1 并存储到EEPROM。这样就能直观的看到机器的使用次数用P1口 LED做为显示，次数大于256是将溢出，按复位模拟开机 或者直接通过开关开机-Each boot EEPROM IIC protocol will add a number and stored in the EEPROM. So you can visually see the frequency of use of the machine as with P1 port LED d