资源列表
digital-thermometer
- 利用数字温度传感器DS18B20与单片机结合来测量温度控制器，使用单片机AT89C51,测温传感器使用DS18B20，用3位共阳极LED数码管以串口传送数据，实现温度显示。-Binding to measure the temperature controller, using the AT89C51 microcontroller, DS18B20 temperature sensors, with a common anode three LED digital serial transmi
music-player
- 1．利用单片机的定时器，通过IO口输出不同频率的方波，以实现输出不同音频的信号，将歌曲每个音符所对应的定时器初值写入数组或存储器。 2．用单片机的IO口控制蜂鸣器，当方波的频率不同时蜂鸣器发出的音调就不同，并采用延时程序设计持续节拍，根据歌曲的简谱利用C语言编程使蜂鸣器播放音乐。-1. Using a microcontroller timer, the output square waves with different frequencies through the IO port, i
code-lock
- 设定初始密码，通过查询扫描键盘检测出所按密码，密码正确则解锁并且LED灯全亮，密码错误则控制IO口报警且LED灯闪烁。可以更改密码，且输错可以重新输入，做成一个简易的密码锁。-Setting initial password, the password is detected by the inquiry scan by a keyboard, the password is correct unlocking and the LED lights lit, wrong password and
Real-time-clock-DS1302
- 基于单片机的电子时钟，能够实现自动实时计时-Based on the single-chip electronic clock, can achieve automatic real-time timing
AVR_OpenServo
- 基于Atmel168的舵机控制程序AVR_OpenServo-Based on Atmel168 Servo Control Program AVR_OpenServo
ZLG7290
- 利用ZLG7290实现对F4区的键盘扫描，将键号显示于8位数码管上-Using ZLG7290 to achieve the F4 area of the keyboard scan, the key number displayed on the 8 digit
SingleTest
- 设计了相应的调光电路和单片机外围接口电路，编写了相应的软件控制程序，以实现路灯的单灯控制功能-Designed the corresponding dimming circuit microcontroller and peripheral interface circuits, prepared the corresponding software control program to implement control functions of a single street lamp
24C02
- 写满24C02A内部整个4K bit串行E2PROM，然后检验写入数据是否正确并显示结果。正确：点亮8个红色发光管(F5区)；错误：熄灭8个红色发光管-Write full 24C02A internal 4K bit serial E2PROM, and then check whether the data is correct and di
LED-xun-huan
- 神舟系列STM32开发板 神舟IV号，LED流水灯-Shenzhou series STM32 development board- Shenzhou IV, LED water lamp
Timer
- 基于51单片机的计时器，实现60s正计时倒计时-Based on 51 single-chip timer, to achieve 60s timing countdown
USARTPTFTLCD
- 基于STM32的编程开发，通过串口程序发送内容，然后STM32接收并显示到TFT-LCD显示屏上。-STM32 usart and tft-lcd
SpeedControl
- 将设置的转速与当前测量的转速比较，得出差值用于控制DAC0832的输出电压，从而控制直流电机的转速，使转速逐渐达到设置转速。-Comparing the current speed with the set speed, the difference is obtained to adjust the output vo...