资源列表
iso-7816
- iso-7816协议的模拟实现，即使单片机没有智能卡接口，也可以使用GPIO模拟实现该协议控制智能卡-iso-7816 protocol simulation, even if the single-chip smart card interface can also use the GPIO analog implementation of the protocol control smart card
51MCUSJA1000
- 基于51系列单片机的can总线驱动器 sja1000的驱动程序 本程序基于c8051f系列同样有用-Based on 51 Series MCU can bus drivers drive sja1000 This procedure would also be useful based on the c8051f Series
Ssd1815
- 点阵STN LCM测试，使用51测试平台就可以了，很简单-Dot-matrix STN LCM testing, the use of 51 test platform can be a very simple
celiangyiGUI
- 通过串口控制下位机的一个QT界面，有绘制波形，读取电压电流等参量的功能。-Through the serial port of a slave under the control of QT interface with drawing waveforms, read voltage and current parameters of the function.
joypad
- 为89s51写的控制蓝牙模块实现蓝牙手柄的一段代码-89s51 write control for the Bluetooth module Bluetooth handle a piece of code
msp430_mma7361
- 这是采用msp430单片机采集freescale加速度信号，里面包括读写设置和中断程序。-This is a single chip using msp430 collection freescale acceleration signal, which includes reading and writing procedures to set up and interrupted.
PT16312VFD
- PT6312驱动程序，已基本完成功能，包括点亮VFD，扫描按键等。需根据自己的VFD规格进行设置。-PT6312 driver, has been basically completed features, including lit VFD, such as scan button. VFD need according to their own specifications set.
16C550
- 51单片机驱动16C550-51 Single-chip driver 16C550
C8051FPCB
- C8051F系列单片机PCB图库.rar- PCB of C8051F MCU
C_System_IO
- 单片机系统扩展:通过扩展并行三总线来进行并行总线接口扩展；通过UART或I/O口模拟几种串行通信的特点来进行串行总线接口扩展。 -SCM system expansion: by extending the parallel three-bus to parallel bus interface expansion through UART or I/O port simulation of several serial communication features to extend t
myuCOS
- 把ucosII操作系统移植到AT89S52单片机上，STC等其他的51内核的单片机不需改动-The ucosII operating system migration to the AT89S52 microcontroller, STC and other of the 51 core MCU without changes
bc-lib
- 包含一些PCB库与与原理图库，希望能提高大家的作图效率-Contains PCB and schematic library database and hope to improve the efficiency of our mapping