资源列表
12232Abusdriver
- 与51单片机相关，用于与上位机之间的通信驱动-associated with the MCU 51 for the PC and communications between the driver
SPEED-TEST
- 汽车速度测试器,以1米的间隔放置光感应器,含3个按键,RESET START/STOP/ 三位数码显示-vehicle speed test device to a meter intervals optical sensors placed, with three buttons, RESET START / STOP / 3 digital display
n.m
- 4-5-5bp网络，控制输出的PID的三个参数。。。实现控制功能。-4 - 5 - 5bp networks, PID control the output of the three parameters. . . Control functions.
at24c128
- at24c128读写源程序.用ASM写的C函数，可以直接用C51调用。-at24c128 literacy source. Using ASM functions written in C, can be called directly with C51.
anq-1
- 为目前世面上销售的疯狂健身器的源程序,用89C51实现-surface for the current World sales of fitness-frenzied source, with 89C51
ad197
- 12位A/D MAX197转换子函数 子函数名：ad_cy（） 参考电压：4.096v-12-bit A / D conversion MAX197 Functions Functions Name : ad_cy () reference voltage : 4.096V
da1230
- 12位 D/A DAC1230转换子函数 子函数名：da_zh（int a） 参考电压：5.000v-12 D / A conversion Functions DAC1230 Functions Name : da_zh (int a) the reference voltage : 5.000v
LCD_DR
- //使用说明: //使用前请先定义keyscan为单片机的 //某个端口,如#define keyscan P1 //程序中扫描信号从keyscan高4位输出， //键值返回信号从keyscan低4位读入， //故使用时硬件电路需要与之相对， //或者把软件中相应地方修改即可-/ / use : / / use the former post keyscan definition of SCM / / a port, keyscan such as # define P1
44scan
- //使用前请先定义keyscan为单片机的 //某个端口,如#define keyscan P1 //程序中扫描信号从keyscan高4位输出， //键值返回信号从keyscan低4位读入， //故使用时硬件电路需要与之相对， //或者把软件中相应地方修改即可-/ / use the former post keyscan definition of SCM / / a port, keyscan such as # define P1 / / scanning proces
maxmain
- //液晶显示初始化ini_OCMJ(void)和驱动程序sub_lcd(uchar in)。 //占用I/O口为 #define LCD_OUT P4 //sbit LCD_BUSY=P3^6 //sbit LCD_REQ=P3^7 -/ / LCD ini_OCMJ initialization (void) and driver sub_lcd ( uchar in). / / Occupiers I / O # define LCD_OUT P4 / / sbit LCD_B
ISD4000
- ISD4000语音与89C51单片机通用开发板源程序-ISD4000 voice and 89C51 definitive source development board
RX2
- small RTOS 嵌入式实时多任务开发，无线发送程序-small RTOS for embedded real-time multi-task development, wireless Send procedures