资源列表
led_51
- 本程序是4位七段显示、3x3键扫实验，正确无误。-4 This procedure is the seventh show, 3x3 keys sweep experiments are correct.
430UART1
- 430系列单片机的UART1通信测试，可供参考-430 Series Single-chip communications test of the UART1 is available for reference
I2C
- AVR单片机应用，I2C总线接口扩展C程序代码-AVR single-chip application, I2C expansion bus interface C code
code
- 三个低层驱动，24C256和74HC573and74HC595和MAX1270-Three low-level drivers, 24C256, and 74HC573and74HC595 and MAX1270
lcd_display
- 液晶显示模块。在lcd上显示数字的函数。-display of the lcd
adc
- 这是利用NEC单片机开发的ADC功能代码，大家参考一下-This is developed using NEC MCU ADC function code, your reference
17869345Touch_ADS7846ADS7843
- 触摸屏控制芯片ASD7843的驱动程序，c51编写-Touch screen controller chip ASD7843 driver, c51 prepared
18b20
- 包括18B20，99秒时间计数，红外解码液晶lcd1602,以及点阵代码。-Including 18B20, 99 seconds count, IR decoding LCD lcd1602, and the dot matrix code.
ajxs
- at89s52最小系统，数码管系统测试程序-at89s52 smallest systems, digital control system testing procedures
PPMCap
- 此代码用来读取PPM信号，此PPM信号为一条数据线上的串行脉冲信号，脉冲之间的宽度代表某一个通道的数据信息-This code is used to read the PPM signal, this PPM signal is a pulse signal of a serial data line, a pulse width between the data information representative of a channel
four-key-digital-clock-of-TX-1C
- 用郭天祥TX-1C开发板写的数码管四按键时钟，调时间时会闪烁，功能还不错。-Debates TX-1C with a development board to write four key digital clock, transfer time will flash, functions well.
1-7
- 智能小车循迹跑，数线，躲避障碍物（2011年电子大赛题目）-Car tracking number line unblinded (2011)