资源列表
454
- 51单片机数据变换程序，使用率高，可实现字节的变换或二进制变换-51 single-chip data transformation process, the high usage rate, may change or achieve byte binary transform
keil51tiaoshixinde
- 此书为keilC的调试心得，有助于开发过程中错误的理解，积累开发经验！-Debugging keilC book for ideas and help to develop understanding of the process error, the accumulation of development experience!
ruisa_MCU_model_car
- 参加日本瑞萨公司模型车比赛时用的程序，适用于瑞萨公司的高速8位单片机-The C file is for 8-bit high speed MCU on ruisa s model car.
led
- 4组流水灯的轮流显示,第一组由不亮到微亮；第二组由左到右依次变亮，第三组由右到左依次变亮，第四组全部亮灭闪烁。-the display of led lamp，the first turn lighter gradually,the second turn light from left to right,the third turn light from right to left,the last between turn light and turn down.
project3
- 本例程使用GPIO模拟I2C时序实现串行EEPROM的读写，并测试读写速度。 核心文件为： b i2c_gpio.c/.h ： I2C底层协议的实现代码（所有的I2C器件均可用） b eeprom_24xx.c/.h : 24XX串行EEPROM的驱动程序 demo_i2c_eeprom.c/.h : 演示EEPROM读写的主程序 修改SCL时钟频率的方法：修改b i2c_gpio.c中的函数 static void i2c_Delay(void)-
CHENGKONGLVBO
- C51程控滤波程序，采用MAX262，和数字电位器，采用8位数码管显示，按键是4*4按键，主要是受到开发条件的限制，使用的是开发板-C51 program-controlled filtering procedure for the MAX262, and digital potentiometers, using eight digital tube display, button is 4* 4 buttons, mainly due to the development of condit
basicprogram
- 一些基础而简单的C语言程序，供大家参考一下，有错误请指正啊-Some basic and simple C language program for your reference, if there is an error, please correct ah ~ ~ ~
tongbu
- 包含飞思卡尔单片机的必须模块子功能，以及各模块的备注使用说明-Describe the main function of Freescale MCU
c
- mage16 brainpower vehile
WDR
- PIC16f877单片机，温控报警系统，128*64液晶显示屏显示温度，高温报警。汇编编写。-PIC16f877 microcontroller, temperature control alarm system, 128* 64 LCD display shows temperature, high temperature alarm. The compilation prepared.
juzongxiankongzhiweiLED
- 采用51单片机总线控制方式，来控制点亮发光二级管的方式心得-bus control LED light
8051_18b20_c--
- 18b20温度传感器驱动代码，8051/8052，模拟的传送数据协议，单总线-18 b20 temperature sensor driver code, 8051/8052, the simulation data transfer agreement, single bus