资源列表
IrDA
- 红外通信程序，在集中器采集器电表和手持终端及主台通信中有很好的运用
IRC
- 红外线发射与接收源程序,含编码说明，初学红外遥控编程必备-Infrared transmitter and receiver source, containing coded instructions
Timer
- 定时器编写的1s定时程序,方式１，１s的延时.-Timer Timing 1s written procedures
tim
- 一个SN8P2714的LCD驱动程序可以显示时间-A SN8P2714 the LCD driver can display time
wenduji
- 这是用热敏电阻传感器输出的电压模拟量经模数转换器转为数字量,再由单片机处理后由四位一体共阳数码管显示的数字温度计(高温可报警)-This is the voltage simulation quantity which outputs with the thermistor sensor transfers the digital quantity after the modulus switch, again after monolithic integrated circuit proces
I2CreadE2PROM-24C16
- E2PROM-24C16的读写程序，使用I2C总线，ARM7开发平台-E2PROM-24C16 reading and writing program, using the I2C bus, ARM7 development platform
nrf24L01-send-and-accept
- 基于51单片机的nrf24L01无线模块的接收和发送程序-Receive and transmit procedures based the 51 SCM nrf24L01 wireless module
ADCUART
- PIC18F4520_ADC擷取_UART輸出-PIC18F4520_ADC capture _UART output
I2C-based-temperature-recorder
- 基于I2C的温度记录仪，通过DS18B20采集到温度，显示到液晶并存入EEPROM，最后通过串口发送给上位机-I2C based temperature recorder, collected by DS18B20 temperature to the liquid crystal display and stored in EEPROM, finally sent to the host computer through the serial port
date-year-month-week-time
- 周立功7289跟ATmega64实现外部中断修改时钟的时钟显示程序-display time
modbusRTU
- modbus-RTU已经测试通过，c#代码-modbus-RTU has been tested by
FIFO-ring-buffer
- 用ICCAVR写的 ATmega640的串口的驱动，使用了先进先出的环形缓冲区技术 这是一个使用例子 稍微改动一下即可用到自己的项目中-ATmega640 with ICCAVR write serial driver, using FIFO ring buffer technology which is a slight change to the use of examples used in your own projects