资源列表
gongjiaochebaozhan
- 一个汇编程序，是我课程设计的参考，喜欢单片机的可以下下来看。
SA
- 台历程序可现实温度，用于51单片机，仅供参考-Calendar program can be real temperature for 51 single-chip, for reference only
DS1302
- 本程序是基于ATMEGA128的实现时钟的C语言程序，时钟芯片是DS1302.-This procedure is based on the realization of the clock ATMEGA128 C language program, the clock chip DS1302.
24C01
- 这是存储芯片24C01的驱动程序，我己经用过，可以直接用-This is memory chips 24 c01 driver, I have been used, can use directly
FFF
- 基于C51单片机的红外接收解码及点阵显示和音乐播放-Infrared receiving and decoding based on C51 MCU and dot matrix display and music player
v37
- 软件 模拟IIC总线读写数据，并且支持温度、距离、模拟量的读写，仿真硬件时序-IIC bus simulation software to read and write data, and support temperature, distance, literacy analog simulation hardware Sequencers
txjk
- 单片机各种通信接口程序-SCM various communications interface program
ip
- 通过arm开发板的web服务器（boa）获取表单提交的IP地址，子网掩码，及网关，并修改设备的IP地址，子网掩码，及网关
SUCCESS1
- ds18b20传感器使用，汇编程序，实现温度采集和显示以及串口通讯。而且调试通过-DS18B20 sensors used, the compilation process, the realization of temperature acquisition and display, as well as serial communication. And debugging through
avr_encoder
- 1.将连接编码器的I/O口初始化成带上拉的输入 2.开启单片机的外部中断0，并配置成任意的逻辑电平变化都将引发中断 3.提供读取编码器计数值的API 4.提供读取编码器旋转方向的API-1. Connect the encoder I/O port is initialized to inputs with pull 2. Turn on the external microcontroller interrupt 0, and configured to any logic lev
shumaguanzuoyi
- 单片机数码管动态循环左移c程序，已通过测试，在keil环境可生成.hex文件-Single-chip digital tube dynamic cycle left c program, has passed the test, can be generated in keil environment. Hex file
modbusControl
- 本项目文件需要采用 modbus poll软件打开,包含波特率.mbp，继电器.mbp，状态.mbp，工作模式.mbp-The need to open the project file with MODBUS poll software, including baud rate.Mbp, relay.Mbp,.Mbp,.Mbp mode