资源列表
dianzi_clock
- 程序及操作指南：程序写入上电后，将在四个数码管上显示0000，然后每隔一分钟，数码管将从低位跳变，该程序模拟的就是时钟。用按键数显键可将时间调至正确时间。-procedures and operational guidelines : procedure into power, in possession of four digital display on the 0000, then every one minute of digital jump from the low, the pro
1
- 红外检测 已经调试通过了 没有问题 要得下哈 AVR-Infrared AVR
main_PID_ok1
- 一个很好的PID程序,只需稍加修加便可移植到其它系统当中
systempwm
- 直流电机的闭环控制，包括初始化设置定时器，初始化设置设定INT0的工作方式，设置PWM的脉冲宽度和设定方向等-Closed-loop DC motor control, including the initialization settings timer, initialization settings set INT0 work, set PWM pulse width and set the direction
interrupt
- keil for inturrupt manual. from korea
240X128LCD
- MSP430F449 + LCDdip 顯示圓形-msp430F449+ lcddip display
cdma_test
- 手持机cdma功能测试 pos机基于ARM7无系统开发测实例-handpos cdma function test!,welcome to you see!
tc9012-011
- 本程序主要是遥控器解码和1602驱动程序 // 功能:解码红外遥控器 // 遥控器芯片:tc9012-011 -This procedure is mainly remote decoding and the 1602 driver// Function: Decoding Infrared Remote Control// Remote Control Chip: tc9012-011
IIC-a-LCD1602
- PIC16F877A的IIC与LCD1602程序源代码，供初学者使用-PIC16F877A the IIC LCD1602 procedures source code, for beginners
PS2keyboard
- ps2键盘的移植程序，添加即可使用！ 这个键盘只有18个按键，其协议按照PS/2的协议发送的。这个键盘只有18个按键，其协议按照PS/2的协议发送的。对应的18个按键的通码在kb.h里边已经描述清楚，使用时候直接判断即可。-Add to the ps2 keyboard transplantation procedures! Only 18 keys, this keyboard its agreement sent in accordance with the PS/2 protocol.
DHT11_C
- DHT11单片机C语言程序，我用在STC89C52上-The DHT11 microcontroller C language program, I used in STC89C52 on
Counting-counter-module-testing
- 采用计数方式计数脉冲，利用系统节拍定时器生成100个脉冲,测试计数器功能-Using counting count pulse is generated using the system tick timer 100 pulses counter function testing