资源列表
IIC
- IIC模拟通用代码，适用于所有51的模拟IIC的操作(IIC analog universal code for all 51 analog IIC operations)
驱动
- stm32源码，温湿度传感器，感应，源代码，源代码，源代码。(STM32 source code, temperature and humidity sensors, induction, source code)
DS1302
- Keil MDK 开发环境，设置时钟，读取时钟等(Keil MDK development environment, set the clock, read the clock and so on)
dac
- atxmega128a1u dac driver!
M8
- pt2262等编码解码分析 大家分享 欢迎发表评论(PT2262 and other coding and decoding analysis to share, welcome to comment)
I2C
- GPIO 模拟I2C 可以进行读和写操作(gpio to I2C can read write)
DS18B20
- 温度传感器DS18B20控制程序，显示环境温度,编译优化等级-01,三位数码管显示，读取当前环境温度，精度达0.1度，温度范围0-99度。(Temperature sensor DS18B20 control procedures, display environment temperature, compile optimization level -01, three digital tube display, read the current ambient temperature, ac
DS1302
- DS1302实时时钟芯片驱动程序,系统时钟7.3728MHZ，设置熔丝位为外部高频石英晶体振荡，启动时间4.1ms。(DS1302 real-time clock chip driver, the system clock 7.3728MHZ, set the fuse bit for the external high-frequency quartz crystal oscillation, startup time of 4.1ms.)
51_IO_I2C
- 使用51单片机IO口模拟I2C总线接口，实现与MS5611的通信(The use of 51 single-chip IO port analog I2C bus interface to achieve communication with the MS5611)
NEC
- 用NEC红外遥控通过51单片机控制四位数码管，数码管为TM1637四位数码管显示模块(With NEC infrared remote control, through 51 SCM control four digital tube, digital tube for TM1637, four digital tube display module)
ads1115
- 本程序是本人严格按照时序设计的代码，运行正常，经过工厂大规模运行，全部没有在ad方面出过问题。本程序有严密的详细的中文释义。(This program is in strict accordance with the timing of the design code, the operation is normal, after large-scale operation of the factory, all in the ad did not have problems.)
汇编源程序
- 汇编语言使步进电机转动，正转反转等，也许和有些不一样，此程序仅供参考(Assembly language enables stepper motors to rotate)