资源列表
ds12c887setup
- 时钟芯片ds12c887线片驱动程序，可直接应用
LCD51F
- 说明：本LCD为LCM161（HD44780驱动器）字符显示器. 接线：LCD D0-D8(PIN7-14) 对映用户板P0.0--P0.7 LCD VSS(PIN1) 接 GND,VDD(PIN2)接+5V,LCD驱动电源V0(PIN3)接可调电阻ADJ,调节亮度 LCD寄存器选择RS(PIN4)接P2.0,读写选择R/W(PIN5)接P2.1,使能端EN(PIN6)接P2.2(高电平有效) 本程序采用I/O口模仿总线时序,故无需做任何硬件扩展.屏幕显示:\"welc
LCD
- lcd驱动程序示例 大家可以参考参考 很不错的（并联方式）
TEST44X_testLED
- MSP430 LCD驱动程序，包括LED-MSP430 LCD drivers, including LED
znzxkg
- 智能总线式开关,很有用，已经实验成功，可以根据需要修改-Intelligent bus switch, very useful, has been a successful experiment, based on a need to amend the
temperature
- 温度计18b20源程序，只是单总线是挂一个芯片-Thermometer 18b20 source, only a single bus is pegged to a chip ..
kpd
- keypad header file for PIC
usart
- avr单片机串口通讯型号是mage644p-control the serial output of the microcontroller avr, microcontroller model 644p
hue-circle
- 本程序旨在在尽量节约定时器资源的情况下实现三彩LED在饱和度和亮度都为50 时的色相循环 以及包含RGB与HSB互相转换函数的头文件-This program is designed to save as much as possible in the case of timer resources to achieve three-color LED in the saturation and brightness of the hue cycle of 50 and contai
EPROM-Erase-Check
- EPROM Erase Check - Verify erase quality
STC15FEEPROM
- 用于STC15F系列单片机EEPROM的使用-Applicable to the use of STC15F microcontroller EEPROM
DS1302.c
- 使用ds1302基于51单片机制作的电子时钟程序-Using ds1302 based on 51 single-chip electronic clock production process