资源列表
RTC
- freescale RTC时基子程序，现实时基的控制．-自动检测中英文中译英英译中百度翻译 翻译结果（中 > 英）复制结果 Freescale RTC timing subroutine, real time control.
init430
- MSP430初始化程序，根据需要修改变量-MSP430 initialization，Modify the variable
16jinzhizhuanhuanchengBCDma
- 单片机程序样例开发-16进制转换成BCD码，基本程序，适合初学者-Sample of the microcontroller program development-16 hex conversion into a BCD code, the basic procedure, suitable for beginners
jishuqi
- 定时器，计数器。用共阴极数码管显示计数。定时器中断控制计数脉冲的输出。计数器对该脉冲进行计数。-Timers, counters. With common cathode LED display count. The timer interrupt to control the output of the count pulse. Counter to the pulse count.
key
- 集按键消抖，不影响cpu时序，c程序，单键，复合键，点触，长按连续加或减（switch case 语句）-Set button debounce, does not affect the cpu timing, c program, a single bond, composite key, tap, press and continuous plus or minus
74HC595_C51
- 用C51控制74HC595驱动LED数码管显示的例程-74HC595 drive LED digital tube display routines with C51 control
adc0809
- 程序采用单片机的定时器产生一个时钟，作为ADC0809的CLK时钟。并读取A/D的值，同时转换为十进制，后送到LED显示。单片机C语言编译软件用著名Keil C51编译器，Keil C51是德国Keil Software公司出品的51系列兼容单片机C语言软件开发系统，与汇编相比，C语言在功能上、结构性、可读性、可维护性上有明显的优势，因而易学易用，本次ADC程序就是基于Keil C编写出来的。 总的C语言程序由LED显示模块，进制转换模块，ADC模块，主函数构成。-The program
6803nitialization
- LTC6803-1 的初始化，使用codewarrior PE工具生成SPI驱动-nitialization LTC6803-1
dongtaixianshi
- 单片机数码管动态显示 利用 j 值的变化，来控制数码管数值变化间隔的时间-Single-chip digital tube dynamic display using the j value changes, to control digital value change the time interval
STC89C51
- 采用单片机内部中断定时器功能实现定时功能，然后利用定时在数码管上显示要显示的东西-Using internal microcontroller interrupt timer function to achieve timing function, and then use regularly in the digital tube display to show something
Unsigned-four-byte-operation
- 无符号四字节运算,只是子程序，可直接复制到程序里，然后调用。无符号双字节运算。-Unsigned four byte operation, only the subroutine, can be directly copied into the program, and then call. Unsigned byte operations.
9325_CODE
- 9325控制器的液晶屏可以控制液晶屏的竖屏和横屏显示，这是相当好用的竖屏和横屏的初始化代码，可以直接使用。-9325 LCD controller can control the vertical LCD screen and horizontal screen display, which is quite easy to use vertical screen and horizontal screen initialization code can be used directly.