资源列表
pic-c
- PIC单片机，C语言编写程序概要，学习教程-PIC microcontroller, C language programming overview, tutorials
qw
- 红外一体化接收头接收到红外遥控发射器所发射的信号，并将此信号进行整形和反相送入单片 机 P3.2 端口。经过软件译码，将译码结果（按键代码）送数码管显示。-Integrated IR remote control infrared receiver receives the signals emitted by the transmitter and the signal shaping and the RP into the monolithic Machine P3.2 port.
DG007
- 红外一体化接收头接收到红外遥控发射器所发射的信号，并将此信号进行整形和反相送入单片 机 P3.2 端口。经过软件译码，将译码结果（按键代码）送数码管显示。-Integrated IR remote control infrared receiver receives the signals emitted by the transmitter and the signal shaping and the RP into the monolithic Machine P3.2 port.
Keil_Code
- 6 位数码管动态扫描显示,就是将 6 个数码管的 8 个相同的段线并接在一起，通过 限流电阻R10---R20、接到 STC89C52 的 P0 口，由 P0 口控制字段输出(低电平有 DG650A 51 单片机开发板 东哥单片机学习网 WWW.PICAVR.COM 效)-6 digital dynamic scan showed that the six of eight digital lines and then the same segment together, throu
002_C
- 6 位数码管动态扫描显示,就是将 6 个数码管的 8 个相同的段线并接在一起，通过 限流电阻R10---R20、接到 STC89C52 的 P0 口，由 P0 口控制字段输出(低电平有 DG650A 51 单片机开发板 东哥单片机学习网 WWW.PICAVR.COM 效)-6 digital dynamic scan showed that the six of eight digital lines and then the same segment together, throu
DG005_C
- 6 位数码管动态扫描显示,就是将 6 个数码管的 8 个相同的段线并接在一起，通过 限流电阻R10---R20、接到 STC89C52 的 P0 口，由 P0 口控制字段输出(低电平有 DG650A 51 单片机开发板 东哥单片机学习网 WWW.PICAVR.COM 效)-6 digital dynamic scan showed that the six of eight digital lines and then the same segment together, throu
DG002_C
- P2 端口的 LED 先从从右至左方向依次点亮，再从左至右方向依次点亮，如此循环形成流水灯效 果。-P2 port LED start from right to left direction of the turn lights were lit from left to right direction, and so the formation of water-efficient lights Fruit.
PWM
- LED 流水灯 定时器0工作在方LED 流水灯 C 语言编译～-LED 流水灯 定时器0工作在方
HG16016002G
- This Resouce Is For Dot Matrix Liquid Crystal Modules Controlled By UltraChip S UC1698-This Resouce Is For Dot Matrix Liquid Crystal Modules Controlled By UltraChip S UC1698
supersound
- 使用stm32芯片驱动超声波传感器，有串口得到数据，有命令IO口读取-Use stm32 chip drive ultrasonic sensors
adc-convert
- Platform: AVR mega16学习板 Project : 实验三十：ADC实验 Clock F : 3.6864MHz Software: ICCAVR7.14C -Clock F : 3.6864MHz Software: ICCAVR7.14C
servo
- robot servo motor control program