资源列表
ISE-chuankou
- 基于FPGA的串口通讯程序，用VHDL语言编写，用ISE平台编译，并且用串口调试助手和PC机通讯准备无误！-FPGA-based serial communication program using VHDL language, compiled with ISE platform, ready to correct and serial debugging aides and PC communication!
32-bit-RISC
- 基于MIPS指令集的32位RISC处理器逻辑设计的论文，讲的非常详细适合初学者学习。-32-bit RISC processor logic based on MIPS instruction set design paper, speak very detailed is suitable for beginners to learn.
FPGAdesign
- FPGA 设计的入门指导，书中还有相应的代码进行示范，帮助读者理解。-the guide of the junior of FPGA design.a number of codes showed in order to help the reader understand the technology
fpga_-digital-oscilloscope
- 该程序是FPGA在数字示波器的数据采集，时基控制，平率测量，触发等数据采集系统的设计，是数字示波器核心部分-The program is FPGA data acquisition in the digital oscilloscope, the time base control, level measurement, trigger and other data acquisition system, the core of the digital oscilloscope
OV7670_FPGA_DE2
- 基于Verilog语言的OV7670摄像头驱动，在DE2-115FPGA开发板上实现，显示还有点小问题-Based on Verilog language OV7670 camera driver, the DE2-115 implementation on fpga development board, shows that there are some small problems
systemc-2.3.2
- Something interesting SystemC
cpu_store
- VHDL语言制作CPU，8位，16条指令，能够完成多种操作. -VHDL language production CPU, 8-bit, 16 instruction, to complete a variety of operations. VHDL language with CPU, 8-bit, 16 instruction, to complete a variety of operations.
lift
- 本设计用VDHL实现了50层电梯的控制,实现的功能有（1）用LED显示电梯的行进过程,即用数码管显示电梯当前所在楼层的位置。 （2）在每层电梯的入口处有两个按钮上升请求(up)和下降请求(down)，按钮按下时则对应的LED亮。 （3)电梯到达了有请求的楼层之后，把门打开。停留15秒之后，把门关闭。 （4）电梯的运行遵循方向优先原则:当电梯处于上升模式时,只响应比电梯所在位置高的上楼请求信号,由下面上逐个执行,直到最后一个上楼请求执行完毕,如更高层有下楼请求则直接上升到有下楼请求的最
1_wire
- 基于niosII设计的ds18b20控制温度设计，能在开发板上实现。-Based on niosII design ds18b20 temperature control design can be achieved in the development board.
pmmd
- 基于nios的跑马灯设计，DE0开发板上实现了，跑马灯的流动-Based on the design of nios lanterns, DE0 Development Board on the flow, racing lights
2_key
- 利用两个相差一个时钟周期的寄存器进行&~运算，进行下降沿的检测。可用于按键消抖等。(Two regs are used to detect xiajaingyan with &~, and it can be used to switch debounce)
m1_xsi_hdl
- 实用的程序代码，希望对大家有用，已经调试通过