资源列表
vga_7_0728
- 用vga显示数字钟，通过串口可以控制时间显示(With vga digital clock, through the serial port can control the time display)
pci9504
- Verilog 语言编写 PCI9054 控制器的接口电路，实现 PCI总线到本地 8 位总线的转接控制(The Verilog language writes the interface circuit of the PCI9054 controller to realize the transfer control of the PCI bus to the local 8 bit bus)
PWM
- 利用Verilog语言设计一个PWM控制器，实现：控制器输入时钟1MHz；控制器输出脉冲周期1kHz，脉宽最小调节步长0.1%。(The Verilog language is used to design a PWM controller, which is realized: the controller input clock 1MHz; the controller output pulse cycle 1kHz, and the pulse width minimum adjustme
rdf0032
- Xilinx SP605 Built-In Self Test
rdf0031
- MicroBlaze Built In Self Test
rdf0030
- Restore Flash Contents
rdf0029
- DDR3 Memory Interface
rdf0028
- Multiboot on Xilinx SP605
VHDL2FSK
- VHDL 2FSK调制解调器各部分的原理与代码(The principle and code of each part of the VHDL 2FSK modem)
OV7670_TFT
- 针对OV7670视频采集和加水印功能，能够在显示屏上输出摄像头的画面并在画面任意位置添加水印(OV7670 video capture and watermark function)
ad706_test
- AD7606的FPGA驱动，AD7606与FPGA通过并行模式连接。FPGA可以将AD采集到的信号转换成电压信号通过串口输出，可通过PC机串口调试助手查看。实测可用(The drive program of AD7606 write by verilog. FPGA can convert the AD7606'sigal to volatage and send the converted signal to PC through uart.)
tx_rx_fifo
- 通过串口将接收到的数据存入fifo,fifo存满后使能串口发送功能，将接收到的数据发送出去(Use fifo to realize the receive and send function of the uart. The function is no problem.)