搜索资源列表
19点FIR低通滤波C语言程序
- 这是一个对语音信号(0.3kHz~3.4kHz)进行低通滤波的C语言程序， 低通滤波的截止频率为800Hz，滤波器采用19点的有限冲击响应FIR滤波。 语音信号的采样频率为8kHz，每个语音样值按16位整型数存放在insp.dat文件中。-This c program is a low pass filter for radio signal 0.3kHz-3.4kHz.The stop frequence of this filter is 800hz.This digtal filte
FIR
- 设计一FIR低通滤波器 0=<|w|<=0.25Pi,输入n代表FIR滤波器的长度,输出H(ejw)幅度值,N代表输出数,Hbs[N]存放H(ejw)的幅度值,h[n]存放H[z]的系数,算法采用Hamming窗函数
Fir
- FIR低通滤波器
FIR
- Quartus II中滤波器的设计，里面含有高通滤波器，低通滤波器，带阻滤波器，主要用于滤除心电信号中的干扰-Quartus II filter design, which contains a high-pass filter, low-pass filter, band stop filter, mainly used for filtering of ECG signal interference
firh
- 利用FIR滤波器设计一个低通滤波器，能够分析到电力系统中的三次谐波，要求满足如下指标：截止频率150HZ，阻带衰减≥30db-FIR filter design using a low-pass filter, to analyze the power system in the third harmonic, the requirements to meet the following indicators: cut-off frequency 150HZ, stopband attenuat
FIR
- 数字信号处理基于matlab 文件内容 /conv(卷积部分) dupconv 重叠保留法 freqcirconv 频域圆周卷积 freqconv 频域卷积 timecirconv 时域圆周卷积 timeconv 时域卷积 /fft(频域分析部分) d2fft 基2FFT dft DFT最简化程序 dtft DTFT演示 /fir(fir滤波器设计) fir 得到fir滤波器hn getwindow 得到fir
firlpfilter
- 这是一个基于CCS平台的FIR低通滤波器程序，适用于TMS320C54X系列芯片，希望和大家探讨-This is a CCS-based platform FIR low-pass filter process, applicable to TMS320C54X series chips, would like to explore
shuzixinhao
- 数字信号课程设计，FIR的低通带通高通和IIR的低通带通高通滤波器的设计源程序以及主程序-Digital Signal curriculum design, FIR low-pass band-pass IIR high-pass and low-pass band-pass high-pass filter design, as well as the main program source code
lvboqi
- 线性相位FIR低通滤波器和48阶带通滤波器，并进行了比较的源程序。-Linear phase FIR low-pass filter and 48-order band-pass filter, and a comparison of the source.
chengxu
- 设计一个数字FIR低通滤波器，其技术指标如下： Wp=0.2pi Rp=0.25Db Ws=0.3pi As=50db 试写出MATLAB设计的源程序。-Design a digital FIR low-pass filter, the technical indicators are as follows: Wp = 0.2pi Rp = 0.25Db Ws = 0.3pi As = 50db test designed MATLAB source code to write.
dsp6FIR
- 滤波器采样频率为600Hz ，截止频率100Hz 的10阶低通滤波器。并用汇编语言设计一个实现上面要求的FIR 滤波器 (2)要求设计滤波器采样频率为8000Hz ，截止频率500Hz 的40阶低通滤波器。用C语言设计一个实现上面要求的FIR 滤波器 -Filter sampling frequency of 600Hz, the 10 cut-off frequency 100Hz-order low-pass filter. Design and assembly language
lvboq
- 采用频率取样设计法设计FIR数字低通滤波器，实现时还有具体的指标要求-Design using the design of frequency sampling FIR digital low-pass filter, to achieve specific targets when there are requirements
FIR
- 已知一低通滤波器的采样率为2KHz，通带为500Hz，阻带为600 Hz，带内波动3dB，带外衰减-50dB，滤波器的相位具有线性特性，具体幅频特性见下图。要求用等波纹方法设计出该FIR滤波器，然后用TMS320C54x汇编语言编程，并在CCS下调试实现该FIR滤波器。-A low-pass filter known to the sampling rate of 2KHz, passband to 500Hz, stopband to 600 Hz, with fluctuations wit
TheDesignofFIRFilterBasedonFPGA
- 从分析FIR 数字滤波器的原理和设计方法入手,主要针对基于FPGA 实现数字滤波器乘法器的算法进行了比较研究,并通过一个8 阶FIR 低通滤波器的具体设计,简要分析比较了几种算法的优越性和缺点,从而充分发掘和利用FPGA 的高速特性。-From the analysis of FIR digital filter design theory and approach, mainly based on the realization of digital filter FPGA multiplie
ex5
- FIR 及 IIR低通滤波器的设计以及 正弦信号滤波前后的频谱分析 （不同窗函数截断）-FIR and IIR filter design and low-pass filter before and after sinusoidal signal spectrum analysis (different window function truncated)
FIR-matlab
- 此程序是用matlab编写的FIR低通滤波器，为了区别于别人上传的都是调用了滤波器的现成函数filter，我自己用双重for循环编写了整个滤波过程，仿真已经通过-This program is written in matlab lowpass FIR filter, in order to distinguish it from other people upload are ready-made function of the filter is called filter, for my
FIRlpfilter
- FIRLPfilter，FIR低通滤波器 C语言实现-FIRLPfilter
FIRditonglvbo
- FIR低通滤波器，用matlab软件实现-FIR filter using matlab
fir
- 基于verilog的 FIR低通滤波器的实现(Implementation of FIR low pass filter based on Verilog)
数字滤波器
- FIR低通数字滤波器的设计，利用matlab编程语言利用FIR1函数设计低通滤波器。(Design of FIR Low Pass Digital Filter)