搜索资源列表
ti_am335x_evm
- (1)基于部分u-boot代码自己调试的vxworks BSP (2)实现了nand/nor flash的tffs文件系统 (3)实现了对spi dataflash的访问 (4)实现了对启动参数和mac地址的文件保存 (5)通过命令行升级bootrom自身 (6)支持通过命令行实现对elf/bin文件格式的vxworks的下载,升级和引导 (7)实现了atmel的对32Mflash的支持,解决了芯片本身的bug (8)实现了CPU最小系统SDRAM FLASH 网口 串口的自检操作-(1) Ba
DMC2440I
- DMC-2440-I采用基于ARM920T内核的Samsung处理器 S3C2440A, 标准主频400MHz,最高主频可达533MHz。板载64MB的SDRAM,128MB的Nand Flash以及2MB的Nor Flash。DMC-2440-I是根据S3C2440A的全部功能而开发的全功能嵌入式系统。具有外接资源丰富,性能稳定,低功耗低等特点。适合手持设备的设计开发。支持嵌入式Linux和WINCE5.0.NET操作系统。提供Wince5.0 BSP。 采用linux-2.6.29 内核
LPC2468_mem_test_DEMO
- For LPC-E2468 board, the program shows how to use EMC to work with SDRAM and NAND Flash memorys. The project implements a simple test of the on board SDRAM (K4S281632F) and NAND Flash (HY27UF081G2M)-For LPC-E2468 board, the program shows how to use
nand
- tq2440开发板裸机测试代码 用于测试nand启动大于4K从nand拷贝到SDRAM过程,测试通过。-TQ2440 development board bare metal test code Used for testing the NAND promoter than 4K copy NAND to SDRAM process, testing through.
4_SDRAM_710
- 基于5509A的SDRAM的汇编测试程序,测试好用的程序-Based on a compilation of 5509A of SDRAM test program, test the program easy to use
dsp6
- CPU 看门狗实验 ■ LED 跑马灯实验 ■ CPU Timer 定时器实验 ■ 实时时钟实验 ■ AD 转换实验 ■ ADDR 转为GPIO 试验 ■ 蜂鸣器试验 ■ GPIO 试验 ■ 数码管显示试验 ■ 扩展 SDRAM 读写实验 ■ SPI EEPROM 读写实验 ■ SPI 自启动试验 ■ 快速傅立叶变换(FFT)实验 ■ FIR 滤波器实验 ■ IIR 滤波器实验 ■ 自适应滤波器(FIRLMS)实验 ■ 键盘扫描实验
USB2.0
- usb2.0+FPGA+SDRAM一整套测试程序- usb2.0+ FPGA+ SDRAM set of test procedures
sdram_latest.tar
- SDRAM的控制代码,包含文档说话和testbench测试代码-SDRAM control code, including documents speak and testbench test code
niefou_V2.5
- 单径或多径瑞利衰落信道仿真,实现用SDRAM运行nios,同时用SRAM保存摄像头数据,本科毕设要求参见标准测试模型。- Single path or multipath Rayleigh fading channel simulation, Implemented with SDRAM run nios, while saving camera data SRAM, Undergraduate complete set requirements refer to the standard te
sdr_ctrl_latest.tar
- SDRAM控制器设计源码,内含仿真代码,测试通过-SDRAM controller design source code, include simulation code, test by
LCD_SDRAM
- spartan6 LCD SDRAM测试程序,方便好用,可直接使用-spartan6 LCD SDRAM test code
fanpie_v10
- pwm整流器的建模仿真,本科毕设要求参见标准测试模型,实现用SDRAM运行nios,同时用SRAM保存摄像头数据。- Modeling and simulation pwm rectifier Undergraduate complete set requirements refer to the standard test models, Implemented with SDRAM run nios, while saving camera data SRAM.
junyun
- 实现用SDRAM运行nios,同时用SRAM保存摄像头数据,本科毕设要求参见标准测试模型,数据包传送源码程序。- Implemented with SDRAM run nios, while saving camera data SRAM, Undergraduate complete set requirements refer to the standard test models, Data packet transfer source program.
C5G_LPDDR2_RTL_Test
- 对SDRAM进行读写测试按下KEY0,将发送测试数据,LED1\2将常量,放开KEY0,LED1\2闪烁,大约25秒后,LED1常量,读写成功。-Read and write tests on the SDRAM press KEY0, will send test data, LED1 \ 2 will be constant, release KEY0, LED1 \ 2 flash, about 25 seconds later, LED1 constant, read and write
DDR3_SDRAM
- ddr3 sdram 功能测试。读写测试还有自刷新测试,测试通过。-ddr3 sdram test,write and read ,aoturefresh
自己动手写CPU
- ? Code文件夹 提供了本书每一章涉及的OpenMIPS源代码、测试程序。 ? Tools文件夹 提供了GNU工具链的安装文件,以及一个小工具Bin2Mem.exe,该工具用来将二进制数文件转化为可以用于ModelSim仿真的格式。 ? Doc文件夹 提供了本书使用的一些IP核的说明手册,包括UART控制器、SDRAM控制器、GPIO模块等。还提供了FPGA开发平台DE2的说明手册。(Code folder Provides the OpenMIPS source code and
FMC
- STM32CUBE生成FMC的配置方式,以及测试sdram是否挂上的测试代码(STM32CUBE generates the configuration of the FMC, and tests whether the SDRAM hangs the test code)
nios_test
- nios测试用例,包含adc,jtag,uart,pll,sdram等等(NIOS test case, source code, including ADC, JTAG, UART, PLL, SDRAM and so on)
U-Boot启动第二阶段代码分析
- U-Boot第一阶段的启动流程。(nandflash启动,把nand的4k代码考到sram中,因为nand没址线,不能映射到内存,所以通过sram进行过度,sram中4k代码把整个uboot拷贝到sdram上,初始化好堆栈,为c语言提供条件,进入uboot的第二阶段! )这个阶段主要是初始化硬件设备,为加载U-Boot的第二阶段代码准备RAM空间最后跳转到lib_arm/board.c中start_armboot函数,这是第二阶段的入口点。(U-Boot first phase of the s