资源列表
DAL_ADC
- uCOS下LPC2378 ADC驱动程式，测试可用-uCOS under LPC2378 ADC driver, testing can be used
S25FL016A
- S25FL016A的驱动程序。 SPI flash驱动程序大同小异。但在细节上却很多地方能够导致失败。 这个驱动程序在网上找不到，是我自己写的。 很基础，也很好用-S25FL016A SPI flash driver
12C887
- 本程序可实现时钟两种工作方式（AM/PM）的切换。同时允许对时钟的时间进行调整和设置，且芯片自带备用电池，不会因断电而丢失数据-This program can be two ways of working to achieve clock (AM/PM) of the switch. While allowing time to adjust the clock and settings, and the chip comes with a spare battery, will not lo
alarm
- 产生急速上滑报警音响，要求变化率可控，由键盘输入控制值。按“Q”键退出。-Sound the alarm on the sliding produces rapid, controllable rate of change required by the keyboard input control values. Press " Q" key to exit.
Integrator-comb_timing-state
- 积分梳状滤波器和时序状态机的Verilog语言描述，适合硬件描述初学者-Integrator-comb filter and timing the Verilog language to describe state machines, hardware descr iption suitable for beginners
key_scan
- 基于AVR，SD2405的实时时钟设计,温度补偿，年误差小于10秒。-The TimeClock is Based on AVR and SD2405.
digital-filter-main
- 采用高效的数字滤波电路，可以有效解决高频信号的干扰问题！-it can resolve the problem of EMI with the help of the digital filter circuit.
speed-control
- xs128mal 飞思卡尔 速度采集编写 专家模式-xs128mal Freescale speed acquisition to prepare expert mode
FLASH_read
- 对spi接口的flash操作，用VHDL语言实现，read控制，串行输入，可以1位、2位、4位读出-Spi interface on the flash operation, with the VHDL language, read control, serial input, to one, two, four read
TGMCU_PIC16F876A_IIC
- PIC16F876 I2C程序 用于与24C0x通信 可作学习参考-PIC16F876 MCU to Simulation EEPROM 24C0X I2C Working
1.0
- 用单片机实现各种波形的一个选择，使用按键的方法，可以在c语言开发环境或者keil环境实现-A choice of various waveforms, using the keys with MCU, can be implemented in C language development environment keil environment
Display_2
- Arduino编程，实现语音芯片与电脑之间通信。-Arduino programming, voice communication between the chip and the computer.