资源列表
MAX7456_spi
- MAX7456 OSD generator IC C code interface using SPI
term_ascii
- A split lib for AT commands.
chengxu
- 读取外部RAM的状态机 RAM接口OE，输出使能 WR，低电平写RAM AB【7：0】地址总线 DB【7：0】地址总线 //将RAM 0至127的数据读出并相加最后的结果存入地址254（低8位）255（高8位） -State machine reads the external RAM RAM interface OE Output Enable WR, low-level to write RAM AB [7:0] address bus DB [7:0
cepin
- 采用等精度测频原理实现较宽范围内频率的测量-With equal precision frequency measurement principle to achieve a wide range of frequency measurements
watchdog
- 德州儀器新款dsp TMS320F28335 看門狗程式設計,簡易重置看門狗計數功能,方便使用者開發程式!-Texas Instruments new programming dsp TMS320F28335 watchdog, watchdog reset count of simple functions, to develop user-friendly program!
51_MCU_LED_TEST
- 在51单片机的P0口连接上LED，通过本程序对LED进行点亮、判断操作，来测试P0口的引脚。-Drive LEDs via P0 port of 51 MCU, to test prot 0.
LCD
- 这是基于飞思卡尔单片机MC13213上的LCD驱动。（初始化，IO命令，以及显示函数）-This is based on Freescale' s MC13213 microcontroller on the LCD driver. (Initialization, IO commands, and display functions)
flash
- 基于stm8s系列的华邦Flash驱动代码。使用与W25Q80/W25Q64/W25Q32W25Q16，方便移植。-Stm8s driver code series of Winbond based on Flash. With the use of W25Q80/W25Q64/W25Q32W25Q16, easy to transplant.
demo5763-C
- 调频收音机芯片5763的驱动代码,C语言编写,直接移植即可,代码已经验证OK
temperature
- 基于ds18b20的多点测温系统源程序，对于不同的系统只需改变与温度传感器相连的接口值即可。-multi-point temperature measurement system based on Ds18b20，for different system one has to change the port Value only.
mian
- 读卡器，IC卡的信息读取，如卡号，人名，余额等！-Card reader, IC card read information, such as card number, name, balance, etc.!
elsGame
- 用在stm32或者其他单片机上的纯c的俄罗斯方块源码。需要自行编写屏幕显示的函数（绘制方块和文字），然后将该文档加入即可实现俄罗斯方块游戏。-Stm32 or other microcontroller used in the pure c Tetris source. Need to write your own screen display functions (draw boxes and text), then the document can be achieved by adding