资源列表
spi_loopback
- TMS320F2808的SPI采样程序，适合于初学者简单调试和熟悉其SPI模块。
tcpSeverClient
- 这是我上期在TORNADO下写的基于VXWORKS嵌入式操作系统的TCP/IP通信程序的源代码-This is my last issue in TORNADO written under VxWorks embedded operating system based on the TCP / IP communications program's source code
power
- for power control program for VIA CN700/8
lwIP1.3.0
- lwIP1.3.0在无操作系统上的移植概-lwIP1.3.0 in the absence of the operating system on the transplant takes
GPRS
- 基于STC12C5A60S2和中兴MG2639模块开发的GPRS收发程序-MG2639 and STC12C5A60S2，GPRS
main
- 本文件是字库（GB2312）测试实验程序；使用外部22.1184MHz晶振. * 功能：开机显示\"铭朗科技，WWW.MLARM.COM\"信息，为待机界面。定义 0 ~ 3 、 A 、 * F 为功能键。按\"A\" 键显示输入位码界面，按 0 键页位置加1，按 1 键字位置 * 加1，按 2 键页位置减1，按 3 键字位置减1，并在LCD上显示该汉字。按\"F\"返回 * 显示待机界面
ch7013
- 本驱动为7013 tvout驱动，将CVBS信号输出到 LCD显示，可以用来显示开机图片，或者播放节目-The driver for the 7013 tvout drive will CVBS signal output to the LCD display can be used to show the boot picture, or broadcast programs
FLASHROM
- 利用Verilog通过JTAG口对FPGA（AP030）的 flashrom编程-JTAG port through the use of Verilog for FPGA (AP030) in flashrom Programming
CONTOH_PROGRAM_MENGHIDUPKAN_SEVEN_SEGMENT
- program menghidupkan seven segment.
jianche
- 本人编写的同时利用流水灯、蜂鸣器、数码管静态显示的开发板检测程序。-I write at the same time using water lights, buzzer, LED display boards static testing procedures.
head-files-of-atmega8
- 是单片机Atmega8的头文件。最近在编写智能车代码的时候，发现很有用。可以作为参考。-Is a single-chip Atmega8 header files. Recently in the preparation of the smart vehicle code, I found very useful. Can be used as reference.
Matrix-pseudo-inverse
- 矩阵求伪逆，在图像，机器人，压缩文件方面都有很大的用处-Matrix pseudo-inverse, compressed files have great usefulness in the image, the robot