资源列表
50-1.315M无线模块扫描(STM32神舟IV号-库函数版)
- 主要控制315实现遥控,实现对315信号的处理(stm32 f107 315 model for you stuye stm32 CPU)
MPU6050
- 六轴陀螺仪MPU6050使用例程及电路原理(Gyroscope principle for MPU6050)
FlyFreeRTOS
- free rtos STM32F103 操作系统 移植(free rtos STM32F103)
程序
- 基于单片机的温度采集系统，采用C语言编程，适用于C51单片机(Temperature collection system)
suoxiang
- 通过DSP ECAP模块 捕获高频信号频率占空比信息，并实现锁相功能(ECAP captures high frequency signal frequency duty cycle)
uart[1and2]
- 同时使用STM32两个串口的接收与发送。串口1，串口2，共存且接受采用定时器中断超时，5ms未接收到数据认为本次接收结束(uart1 work with uart2)
污水处理控制器控制程序170112
- 应用于污水处理工艺的水泵驱动程序，该程序使用ucos-III操作系统，运行于STM32F407芯片中，具有LCD12864液晶显示程序，菜单程序，USART通讯，SPI通讯，485通讯等功能。(The pump driver used in the sewage treatment process is running on the STM32F407 chip with the ucos-III operation system. It has the functions of LCD1286
uart_design
- UART设计的VERILOG代码，具有FIFO功能，能实现CPU与外设之间的数据与指令通信(The VERILOG code designed by UART, which has the function of FIFO, can realize the communication between the data and the instruction between the CPU and the peripherals)
UCOSII-任务调度
- stm407 uCOS 移植，本工程实现uCOS任务调度，可直接在stm407上运行(It's a uCOS souce planted on STM407 MCU)
gt9147
- gt9147电容式触屏驱动，支持多点触控方式，最多支持5点同时触摸(gt9147 cap-touch driver)
Dominoes
- NRF2401L驱动，可实现小型局域网组网功能，采用主机轮询方式向设备终端发起数据请求(This project is NRF2401L driver base on 80C51 ,it can use as small PNA(personal area network),The host send the data require to the end-device,end-device request sample data back!)
1路带光耦继电器模块
- 单路继电器模块：可设置高或低电平驱动；继电器电压可设定；(Single circuit relay module: high or low level driver can be set up.)