资源列表
直流电机调速控制程序
- 这是一个简单的基于51单片机的直流电机调速源代码(This is a C code based on 51 single chip microcomputer for DC motor speed regulation)
p4 prayer clock codevision
- This is code program, running text to display prayer times with codevision and atmega64
KEA128
- KEA128 的使用陀螺仪的自平衡控制系统(KEA128's use of the self balancing control of gyroscopes)
45-摄像头串口接收图片407摄像头代码 (1)
- ov2640摄像机资料，并且可以通过上位机上传到串口显示(Ov2640 camera data, and can be uploaded to the serial port by the host compute)
PinChangeInt-master
- arduino的引脚是已经定义了的。如，我在51上模拟arduino的方式写的就是0是P00，27就是P27。然后用digitalWrite（0，HIGH）方法来让P00引脚置1。因为sbit类型的引脚位定义是不能作为参数传递的。(Arduino pins is already defined. For example, I wrote on the 51 of the method of simulation arduino is 0 is P00, 27 is P27. Then use d
Firmata
- wire libraryWire协议总线通信中最为重要的一种操作，在每次总线通信之前主机必须首先发送复位信号。如程序1.1所示，产生复位信号时主机首先将总线拉低480~960μs然后释放，由于上拉电阻的存在，此时总线变为高电平。(Wire protocol, the operation of the most important of a kind of bus communication, the host before each bus communication must first se
TinyWireS
- wire libraryWire协议总线通信中最为重要的一种操作，在每次总线通信之前主机必须首先发送复位信号。如程序1.1所示，产生复位信号时主机首先将总线拉低480~960μs然后释放，由于上拉电阻的存在，此时总线变为高电平。(Wire protocol, the operation of the most important of a kind of bus communication, the host before each bus communication must first se
单片机实验二参考资料
- 利用51单片机实现唱歌，使用C语言编程，而且还有学号的实现(Temperature sensing by 51 single chip microcomputer)
实验15 温度计DS18B20
- 可用于实现51单片机温度传感器显示温度,运用的是C语言来进行编程(Temperature sensing by 51 single chip microcomputer)
msp430fg439代码示例
- msp430fg439 例程，包括串口通信，a/d转换等，还有一个心电信号a/d转换与实时显示的例程。(Msp430fg439 routines, including serial communication, a/d conversion and so on, and a routine for a/d conversion and real-time display of ECG signals.)
dif
- FPGA设计中，实现基准时钟的分频模块，该模块是将外围电路中所提供的50MHZ将其分频，对时钟模块作用后产生一秒一秒的时钟信号，另外对显示模块的计数器提供时钟实现显示模块的扫描功能。(The design of FPGA, the reference clock frequency module, this module is provided in the peripheral circuit of the 50MHZ frequency, the clock module generates
ADC
- ADC功能检测实现来完成用K60来实现模数转换(Implementation of ADC function detection)