资源列表
按键亮灯实验
- 通过按键来实现灯的亮灭，以及对按键延时的了解和翻转功能。(By pressing the key to realize the light of the lamp, and the delay of the key to understand and reverse the function.)
calculator
- 【超值】单片机多项式运算的C语言程序代码，集合了不同方法 #include <malloc.h> #include <sstream> #include <iostream.h> #define STACK_INIT_SIZE 100(Polynomial operation #include <malloc.h> #include <sstream> #include <iostream.h> #defin
显示加速度计和陀螺仪的10位原始数据
- 显示加速度计和陀螺仪的10位原始数据 #include <STC12C5A60S2.H> #include <stdio.h> //Keil library #include <INTRINS.H> // 定义51单片机端口 //**************************************** sbit SCL=P2^0; //IIC时钟引脚定义 sbit SDA=P2^1; /
输出比较模式测试实验
- 本实验将实现如下功能：通过定时器的输出比较模式，在PC6~PC9，输出4路PWM，每路PWM频率为500Hz，占空比为50%，每一路PWM相位差为45°(This experiment will realize the following functions: through the timer output comparison mode, in PC6~PC9, output 4 way PWM, each PWM frequency is 500Hz, duty cycle is 50%,
测距
- HC—SR04测量距离 MSP4301612单片机 测量单位得到为mm，(HC-SR04 measure diatans)
6轴加速度计陀螺MPU6050模块文档
- stm32 mpu6050 包含上位机以及程序，说明文档。(Stm32 mpu6050 contains the host computer, as well as procedures, documentation.)
OV7725模块资料V2.0
- OV7725模块资料V2.0 - (ov7725 technology information)
红外检测程序 51单片机
- 红外线程序用51单片机，用keil软件编程用红外对管实验
80端专用
- 本辅助采用12312大时代沙发沙发发阿发是的again爱国(dgahahasbcxvsdhshdsdhsh)
COMPART
- modbus-rtu协议从机代码。功能码01,03,05,16.(MODBUS-RTU protocol slave code. Function code 01,03,05,16.)
jidianqi
- 一个简单用单片机实现继电器控制并具有计数功能，所附的原理图和程序并不配套，但原理基本一致；两个程序，一个是参考程序，另一个是自己编的程序(A simple microcontroller can control the relay and have counting function. The attached schematic diagram and program are not matched, but the principle is basically the same. Two p
32机械臂履带车_记忆调试阶段
- 通过手机蓝牙控制6自由度机械臂，无须单独控制每个角度实现联动控制(Through the mobile phone Bluetooth control 6 degrees of freedom mechanical arm, no need to control each angle to realize the linkage control)