资源列表
modbusrs485
- 利用modbus协议利用RS485进行通信(Using Modbus protocol to communicate with RS485)
无FIFO摄像头 IO??
- 通过stm32 驱动ov7725 DMA 希望对(FYGHH HGJVCT DTGDCGFFUK GLULGG)
EEPROM模板
- 基于STC12C5A60S2的EEPROM的函数模板库，使用时 直接复制粘贴即可(STC12C5A60S2 based on the EEPROM function template library, when used directly copy paste)
Timer0-Timer1-Timer2
- STC15W402......电极转换，及单键功能选择执行；(STC15W402... Electrode conversions and single key function selection are performed;)
IC
- 基于STM32单片机，可对输入的PWM波进行频率测量与占空比测定(Based on STM32 microcontroller, the input PWM wave frequency and the duty cycle can be measured.)
1，标准例程-寄存器版本
- 本次上传的是STM32F407的寄存器开发指南，里面包含完整的寄存器开发指导和源码。(This upload is the STM32F407 register development guide, which contains the complete register development guide and source code.)
OV7670+FIFO+3.0TFT
- ov7670 + FIFO原理，入门，简述，应用(Ov7670 + FIFO principle, introduction, brief descr iption, application)
0809
- 使用ADC0809采集电压值，多路采集，稳定输出值，精准度高(Using ADC0809 to collect voltage values, multi-channel acquisition, stable output value, high accuracy)
4，程序源码
- STM32的软件开发及应用的例程模板，高端例程，带解释(STM32 very very good)
jtd
- 利用51芯片和82C55拓展芯片，实现了十字路*通信号灯的模拟仿真。(Using 51 chip and 82C55 expansion chip, the intersection traffic signal lamp simulation is realized.)
FatFs_sdcard_SPI_25Q128
- 将路由器的不死UBOOT和art放入SD卡,系统先将25q128中的uboot和art备份到SD卡,然后利用STM32将该UBOOT和art下载到25q128里边.该系统采用FATFS11文件系统和MDK平台.(Put the router's undead UBOOT and art into the SD card, the system first read 25q128 for uboot and art backup to SD card, and then use the STM32
YEJING
- 液晶1602的综合练习，自己写的，大家可以参考(LCD 1602 integrated exercises, written by yourself, we can refer to)