资源列表
Jid3A
- 用JAVA语言来实现现数据挖掘中的ID3算法 -JAVA programming language to implement the ID3 algorithm in the current data mining
ycbcr-422-to-444
- ycbcr 422 to 444格式转换-YCbCr 422 to 444 format conversion
tiqutest
- 对于信号发生器给出的方波信号作为待处理的信号，通过程序可以提取第一个脉冲，将后面的滤去。注意信号发生器给出的方波幅 值大概在3.3V左右，满足和FPGA的接口电平匹配。-The back of the filtered square wave signal given by the signal generator as a signal to be processed by the program can extract a pulse. Note that the square ampl
fpga-mcu
- 利用uart接口，51单片机和FPGA完成16位宽的数据通信，包括数据的幷串转换等。-Uart interface 51 of microcontroller and FPGA 16-bit wide data communications, and including Bing string of data conversion.
jishi999999
- 程序实现6位计数器，000000~999999，有一个使能信号en,将使能信号en由FPGA的引脚68接入，使用信号发生器产生方波，en信号为1的时候计数器计数，对于输入方波的幅值调为3.3V，可发现计数器计数一段时间会停止，然后接着计数。-Program six counters, 000000 999999, an enable signal en enable signal en by the FPGA pin 68 access, using the signal generator t
BthDemo
- PDA开发的示例程序,可以用于学习用途，需要的可以下载。-PDA developed sample programs can be used for learning purposes, the need can be downloaded.
plljishi
- 利用脉冲计数产生一个脉宽可调的脉冲，然后作为使能信号送给计数器。测试在具有不同相位时钟下的计数效果，太过设置计数频率，可发现不同相位的时钟计数差别，经验证-Pulse counting to generate a pulse width adjustable pulse, and then as an enabling signal is sent to the counter. Test in a different phase clock count, too set the count f
8frequency
- 8位数字频率计，利用数字信号发生器产生一定频率正弦波，得到验证。-8 digital frequency meter, proven.
MP3Code-AT89C51SND
- AT89C51SND MP3制作源码，包括整个工程，很有参考价值-AT89C51SND source for MP3 creation, including the entire project of great reference value
5TLC54991
- tlc549的c语言51驱动动程序，keil编译可直接使用。 -tlc549 language of c 51 driver driver, c51 compiler can be used directly.
DCOMM
- DMX通讯程序。用于控制LED的的亮度。RGB三中颜色。可直接使用。 -DMX communication procedures. Used to control LED brightness. The three RGB colors. Can be used directly.
12864chengxu
- 基于STC12C5A60S2的液晶显示技术应用系统的设计与实现-Design and Implementation of the technology applications based on STC12C5A60S2 LCD shows