资源列表
RF24
- driver nrf24l01 for linux 2017
Espier_III
- ESPIER III schematic
ENC_ab_dir
- 产生相差90°的AB相脉冲，并且模拟AB相位的超前或滞后，用于ABZ编码器信号的分析(The AB phase pulse with a difference of 90 degrees is produced and the AB phase is simulated forward or lagging, for the analysis of the signal of the ABZ encoder)
ADC0804
- 控制ADC0804的verilog 代码，cpld/fpga都可以使用，用数码管显示ADC采集的二进制数据。(Control ADC0804 verilog code, cpld / fpga can be used to display the ADC digital tube with the binary data collected.)
华为FPA设计流程
- 由于目前所用到的FPGA器件以Altera的为主，所以下面的例子也以Altera为例，工具组合为 modelsim + LeonardoSpectrum/FPGACompilerII + Quartus，但原则和方法对于其他厂家和工具也是基本适用的。(Because the FPGA devices currently used are mainly Altera, so the following example takes Altera as an example. The tools ar
shouhuoji
- 基于51单片机的自动售货机设计，用C语言编程(Design of vending machine based on 51 single chip microcomputer)
mimasuo
- 基于VHDL 4位电子密码锁的设计，在quartus II 上仿真通过(Design of 4 bit electronic cipher lock based on VHDL)
shuzizhong
- 基于vhdl语言的多功能数字钟设计，硬件调试成功(Design of multi-function digital clock based on vhdl)
xapp1065
- Xilinx xapp 1065 application note
myClock
- 四位数码管显示24小时时钟，附上了ucf 芯片是Kintex7(Four bit digital tubes display 24 hour clocks)
04_led_test
- FPGA入门实验，简单的流水灯，计数器的使用较规范(FPGA introductory experiment, simple flow lamp, the use of counter is more standard)
eeprom_test
- eeprom读写，经典的iic接口,学习状态机的写法(read and write eeprom with iic interface)