资源列表
fpu_arch
- Floating point architecture
khanom-heydari
- Floaaattiing poiiint for vhd-Floaaattiing poiiint for vhdlll
polyphaseFIR_1v0
- polyphase fir dilter
reset_syn
- 复位信号的处理，实现“异步清零，同步释放”的功能。-Reset signal processing, " asynchronous clear, synchronous release" function.
clk_div
- 时钟分频功能模块，采用计数器后两位异或再移位的方式实现，节约资源。-Clock divider function module, after using two different counter or re-shift ways to save resources.
rs422_r
- 此功能模块实现了422标准协议的单字节接收功能，采用了起始位＋8位数据位+奇校验+1停止位的方式，实现了串行输入并行输出的功能。-This function module implements the standard protocols 422 single-byte receive function, using the start bit+ 8 data bits odd parity+1+ stop bits, enabling a serial input parallel outpu
rs422_t
- 此功能模块实现了422标准协议的单字节发送功能，采用了起始位＋8位数据位+奇校验+1停止位的方式，实现了并行输入串行输出的功能。-This function module implements the standard protocols 422 single-byte transmit function, the start bit+ 8 data bits odd parity+1+ stop bits, enabling a parallel input serial output.
rx_decode
- 对串行接收数据进行解码的功能，通过状态机实现，属于链路层协议的实现。-Serial reception data decoding function, by state machine, belonging to implement link layer protocol.
cpu
- 一份精简指令cpu源代码，用verilog编写，已经通过仿真验证，可以模块化移植。-This is a file of cpu code. The cpu is risc cpu. It is simulated and verificated.And the cpu can be transplanted as a module.
traffic_controller
- 一款交通灯控制芯片的verilog源码，该源码通过仿真并在FPGA上运行成功，可以实现上位机操作控制交通灯的工作模式：两相模式和四相模式。上位机操作通过串口调试助手来完成。源码中与上位机的接口采用的是UART接口。-This is a verilog code for a kind of traffic light controller. The code was simulated and verificated on FPGA. When the code works on FPGA, it
ahb_system_generator_latest.tar
- AHB system generator. This file is a part of a system generator for AHB system. it is VHDL code for the AMBA arbiter.
two_ASK
- 基于verilog的2ASK调制的程序，调试通过，有需要可以下载来参考-Based verilog of 2ASK modulation process, debugging through, there is a need to download reference