资源列表
bing-to-cuan
- 基于VERILOG的并行转串行程序-Based on the parallel to serial procedures VERILOG
LED
- led的verilog试验，在spandIII上的开发试验-led the verilog test on the development and testing spandIII
vmodcam-ref-vga-demo-12
- 通过fpga（注：xilinx公司的板子）从vmodcam取数据并用vga显示。-vmodcam ref vga demo
vmodcam-ref-hd-demo-12
- 通过fpga控制从vmodcam中获取视频数据并通过vhdmi发送到显示屏上-And sent via fpga control access to video data from vmodcam on display through vhdmi
vmodcam-ref-hd-demo-13
- 通过fpga控制从vmodcam中获取视频数据并通过vga发送到显示屏上2-Fpga control access to video data from vmodcam and send to the display via vga 2
camera-code-fpga
- 一个简单的摄像机代码，通过fpga控制，通过vga显示到显示屏上-A simple camera code, through fpga control, displayed on the screen via vga
Atlys_Demo_BIST_Clean
- 用于atlys—spartan-6板子的自测的一个样本代码.以便板子启动-A sample code for atlys board self-test
vdhl_smg
- 完整代码工程，实现74HC595驱动数码管显示，利用VHDL实现；-Complete code project, the realization of 74 hc595 are needed to drive the digital tube display, using VHDL realization
Our_MIPS_CPU
- 基于MIPS架构的CPU设计，含有完整程序代码，及各模块实现及仿真程序！-CPU design based on MIPS architecture, contains a complete code, and the realization of each module and the simulation program
PWM_LED
- 基于DE2_70平台，编写nios软核c代码，控制流水灯，硬件实现验证通过，适合入门-Based DE2_70 platform, written nios soft core c code, control water lights, verified by hardware implementation, suitable for entry
SW_LCD1602_irq
- SW_LCD1602_irq是nios中实现按键中断以及lcd1602显示-SW_LCD1602_irq is implemented nios interrupt button and display lcd1602
UART_DMA
- UART_DMA的方法是使用nios实现UART方式实现DMA传输，在硬件平台上通过验证实现-UART_DMA way is to use uart dma transfer nios implemented in the hardware platform validated by