资源列表
mxc_i2c
- 我自己学习i2c时在网上看的资料加理解后写的。-study i2c
6counter
- 六进制计数器，输入必需是二进制数.用555定时器来产生1HZ的信号脉冲，作为CP的输入信号-Hex counter, enter the required binary number. 1HZ signal pulse 555 timer to generate the input signal as the CP
nios-II
- NiosII范例，包括了DMA控制，串口通信，定时器中断，以及NIOS的部分范例，对于FPGA内核的开发很有帮助。-NiosII example, including the DMA control, serial communication, timer interrupt, as well as some examples of NIOS, development will be helpful for the FPGA core.
UART_DMA
- 串口通信的FPGA设计，具有高速缓存功能，DMA通信模式。-FPGA design of serial communication, cache, DMA communication mode.
microwave
- 微波炉的控制系统，数字逻辑电路实验大系统代码-Microwave oven control system, digital logic circuit experiment system code
DUAL-PORT-RAM
- vhdl使用双口RAM，工程编译通过。编译工具QUARTUS 9.0。-vhdl using the dual-port RAM, compiled by engineering.
Loudspeaker-module
- 通过触发信号使蜂鸣器发出乐声：7、4、1（高音部）-Through the trigger signal make buzzer send music: 7, 4, 1 (Alt)
The-clock-points-frequency-module
- 对外部晶振50M进行分频，分出1M、1k和1的频率-External crystal oscillator fifty m for crossover, ceding 1 m, 1 k and 1 frequency
module-paomadeng
- 一般是指各种发光二极管，如主板和主机箱上的指示灯。开机后用来指示各种工作状态。-Generally refers to a variety of light-emitting diodes, LEDs on the motherboard and the main chassis. The boot is used to indicate a variety of working conditions.
keyboard
- fpga/cpld按键扫描vhdl语言代码（4x4按键阵列）-Fpga/cpld keypad scanning VHDL language code (4x4 scan)
Unsigned-MultiplicationBooth
- 基于booth算法的移位操作，对带符号数进行乘法运算。-Shifting operation based on the booth algorithm, and the number of unsigned multiplication.
fpga_UDP_NET
- fpga驱动dm9000，通过网口向上位机发送数据。底层为verilog，上层Nios为c。-fpga driver dm9000, send data through the network port up crew. The underlying verilog, upper Nios c.