资源列表
ltc2183
- 在FPGA上编写的通过SPI总线配置外部ADC芯片LTC2183的程序，通过板级调试，验证可用。程序通过状态机实现，将需要配置的寄存器值转为SPI总线的数据格式发送出去。 -Configure external ADC chip LTC2183 via SPI bus program on FPGA written by board-level debugging, verification is available. Program through the state machine, you
ps2_driver
- ps2 协议的verilog代码 底层驱动函数-ps2 agreement verilog code underlying driver function
shift-register
- 移位寄存器的设计与仿真 移位寄存器是既能寄存数据，又能使数据移位的电路。所谓移位功能，就是寄存在电路中的数据，可在移位脉冲的作用下，依次左移或右移。 移位寄存器不仅能用来存储数据，还能用来进行加减乘除的运算，以及串并数据转换，始终分频等，是应用最广泛的数字器件之一。 -Design and Simulation of the shift register are both hosting the data shift register, and can make the data s
I2C
- I2C总线控制程序，很实用的程序，相信对大家会有帮助-I2C bus control procedures
rda5807p_code
- RDA5807P 参考代码 包含I2C部分代码-RDA5807P source code include I2C code
UART
- 用VHDL书写串口通信源码，在fpga上验证过-Serial communication with VHDL source code written in the fpga verified
multiplier
- booth乘法器： 16*16有符号乘法器，Booth编码，简单阵列，Ripple Carry Adder
multiplier_8_bit
- This is 8bit multiplier VHDL code. It s consist of full adder, ripple carry adder(4bit, 8bit) multiplier 8bit, and test bench file. This is a unsigned type.-This is 8bit multiplier VHDL code. It s consist of full adder, ripple carry adder(4bit, 8bit)
SBOX111
- sbox1 for power efficient implementation for aes
16-bit-high-speed-digital-correlator
- 16 位高速数字相关器功能模块，ＶＨＤＬ语言编写-16-bit high-speed digital correlator modules, VHDL language
td
- 实现逻辑分析仪的通道选择。具体选择是有一个按键输入8位的控制信号与没路信号进行逻辑与当控制信号K(i)是‘1’是选择i路信号输出数据，当‘0’时输出全部为零不显示i路波形。-Realize the logical analyzer of chanSpecific choice is to have a keystroke eight control signals and no way signal logic and when the control signal K (I) is 1 i
A-novel-approach-to-realize-Built-in-self-test(BI
- A novel approach to realize Built-in-self-test(BIST)