资源列表
16F628A-DS18B20-PCWHD
- 16F628A DS18B20 PCWHD
Integrator
- libero环境下利用verilogHDL实现积分器功能-libero environment using an integrating function verilogHDL
Differentiators
- libero环境下利用verilogHDL实现微分器功能-libero environment using verilogHDL achieve differentiator function
UART_D
- 这是一个串口调试程序，实现了数据传输判断，通过串口调试助手调试成功-This is a serial debugger, to achieve a data transfer judgments, through the serial debugging assistant debugging success
sn74181
- 运算alu的设计,并附上运算器的代码检测，简单的描述运算器的作用-Computing alu design
ex3
- FPGA控制的电机驱动VHDL代码，可实现正转，反转，启动，停止。并可以实现PWM调速。代码中预留了控制接口，可方便完成上述功能的实现。- The code is for driver based on FPGA. It can realize the function of start, stop, speed adjust.
ex1
- 设计一个循环灯控制器，该控制器控制红、绿、黄三个发光管循环发亮。要求红发光管亮2秒，绿发光管亮3秒，黄发光管亮1秒。（假设外部提供频率为1MHz的方波信号） 编程环境为Quartus II 11.0 仿真环境为 Modelsim 6.6d 通过仿真可以看出。系统复位后，红发光管亮2秒，绿发光管亮3秒，黄发光管亮1秒，三个发光管循环发亮。 -Design a loop lamp controller that controls the red, green and ye
ex2
- 驱动四位共阴极数码管数字显示的电路如图所示。该电路采用动态扫描显示技术，当扫描信号的频率大于50Hz时，可显示稳定的四位数码。试采用FPGA器件设计该电路。写出每个模块的VHDL程序；并在相应的EDA仿真工具上进行仿真。-Drive four common cathode LED digital display circuit as shown. This circuit uses dynamic scanning display technology, when the scan signal
Oscilloscope
- 开发板上芯片是cycloneII，利用Verilog HDL语言编写程序，将波形和波形数据显示在2.4寸TFT液晶屏上。在开发板上成功实现。-Development board chip is cycloneII, use of Verilog HDL language programming, the waveform and waveform data is shown in 2.4-inch TFT LCD screen. Successful implementation of the
26879085sttc4
- Package is for developing the g Encoding techniques and developed in the MATLAB
TMS dsp430 src (FMF)
- FMF model, using with standart FPGA toolset
register file generation
- the zip file consist of the verilog code which generate the 32 bit reg file so that u can read and write the data into them